Confronta i metodi

	Durezza Vickers	Microscopia a Forza Atomica	Analisi agli elementi finiti	Nanoindentazione
Campo	Scienza dei materiali	Scienza dei materiali	Scienza dei materiali	Scienza dei materiali
Famiglia	Process / pipeline	Process / pipeline	Process / pipeline	Process / pipeline
Anno di origine	1922	1986	1943	1992
Ideatore	Smith and Sandland	Gerd Binnig	Richard Courant	Warren Oliver
Tipo	Hardness test	Imaging technique	Computational method	Measurement method
Fonte seminale	Smith, E., & Sandland, G. E. (1922). An accurate method of determining the hardness of metals with particular reference to high-hardness alloys. The Institution of Steel Engineers, 8, 623-641.	Binnig, G., Quate, C. F., & Gerber, C. (1986). Atomic force microscope. Physical Review Letters, 56(9), 930-933.	Zienkiewicz, O. C., & Taylor, R. L. (1977). The Finite Element Method in Engineering Science. McGraw-Hill.	Oliver, W. C., & Pharr, G. M. (1992). An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. Journal of Materials Research, 7(6), 1564-1583.
Alias	Vickers hardness test, Vickers microhardness, HV	AFM, scanning probe microscopy, nanoindentation microscopy	FEA, finite element method	nanoindentation, instrumented indentation, depth-sensing indentation
Correlati	3	3	4	3
Sintesi	Vickers Hardness testing is a mechanical characterization technique for determining material hardness by pressing a diamond pyramid indenter into a material surface under controlled load and measuring the resulting indent dimensions. Invented by Smith and Sandland in 1922, Vickers hardness is applicable across an enormous hardness range (1-2000 HV) using the same indenter geometry at different loads. It is the most versatile hardness test, widely used in materials science, metallurgy, and quality control for assessing material strength and comparing alloy performance.	Atomic Force Microscopy (AFM) is a scanning probe technique that measures nanoscale surface topography and mechanical properties by monitoring interactions between a sharp cantilever tip and a sample surface. Invented by Gerd Binnig in 1986 as an extension of scanning tunneling microscopy, AFM requires neither electrical conductivity nor vacuum operation, making it applicable to virtually any material. It provides three-dimensional topographic maps with sub-nanometer vertical resolution and lateral resolution approaching nanometers, along with simultaneous measurements of mechanical, electrical, and chemical properties.	Finite Element Analysis (FEA) is a numerical technique for obtaining approximate solutions to boundary value problems described by differential equations. Developed systematically by Richard Courant in 1943 and popularized by Clough in the 1960s, FEA divides a complex domain into smaller, simpler elements to solve engineering problems involving stress, strain, heat transfer, and fluid flow. It is the dominant computational method in materials science for predicting material behavior under various loading conditions.	Nanoindentation, or instrumented indentation, is a technique for measuring the hardness and elastic modulus of materials by pressing a hard probe into a sample surface and continuously recording load and penetration depth. Developed by Oliver and Pharr in 1992, nanoindentation enables measurement of mechanical properties of thin films, small volumes, and nanoscale structures with spatial resolution approaching micrometers. It is the standard tool in materials science for characterizing coatings, interfaces, and mechanical properties at the submicron scale.