Air Dispersion Modeling
Atmospheric Dispersion and Transport of Air Pollutants · Also known as: air quality modeling, plume modeling, atmospheric transport, emission dispersion
Air dispersion modeling is a quantitative method to predict the concentration and deposition of air pollutants (dust, gases, particulates) released from industrial sources, traffic, or combustion. Developed empirically by Pasquill and Gifford in the 1960s and formalized into the Gaussian plume model, these methods predict ground-level concentration downwind of a source using wind speed, stability class, source height, and meteorological data. Air dispersion models are essential tools for regulatory compliance, emission permitting, and exposure assessment.
Read the full method
Sign in with a free account to read this section.
Method map
The neighbourhood of related methods — select a node to explore.
When to use it
Use air dispersion modeling for environmental impact assessments of new industrial facilities, quantification of fugitive emissions from stockpiles or chemical plants, compliance demonstration for air quality permits, and exposure assessment near highways or ports. Assume terrain is relatively flat or use Gaussian plume variants for moderate topography. Avoid pure Gaussian models in highly complex terrain; use 3D computational fluid dynamics (CFD) or regulatory models (CALPUFF, AERMOD) instead. Gaussian models work best for passive, non-reactive pollutants; reactive chemistry requires more complex models.
Strengths & limitations
- Simple, fast calculation requiring minimal computational resources compared to CFD approaches
- Well-established regulatory basis (EPA SCRAM, USEPA models) with extensive validation datasets
- Provides conservative (protective) estimates under stable conditions; suitable for permitting decisions
- Easily extended to multiple sources, stacks, and area sources via superposition
- Assumes flat terrain and linear wind field; poor performance over hills, valleys, or in complex urban canopies
- Pasquill-Gifford stability class is a crude approximation; does not capture transient wind fluctuations or vertical wind shear
- Cannot model chemical reactions or particle settling without extensions; limited to inert pollutants or simplified decay
- Overpredicts concentration in calm, stable conditions; underpredicts in highly turbulent urban settings
Frequently asked
What is the difference between Gaussian plume and Gaussian puff models?
Plume models assume a continuous, steady release; the plume shape extends downwind indefinitely. Puff models describe a discrete parcel of pollutant released instantaneously, which drifts and expands with time and wind. Use plume models for long-duration releases (hours, days); use puff models for accidental spills or short transient releases.
Why do air quality standards focus on ground-level concentration rather than average throughout the plume?
Humans, crops, and ecosystems near the ground experience the highest doses. Ground-level concentration is also where peak impacts occur and is the most conservative (protective) point for risk assessment. Regulatory standards are set to protect ground-level receptors.
Can I use Gaussian plume modeling for particulate matter (PM10) that settles out?
Yes, with settling and deposition extensions. The USEPA AERMOD model includes dry deposition velocity as a function of particle size. Large particles (>10 μm) settle rapidly and do not travel far downwind; small particles (<2.5 μm) behave like inert gases and disperse over longer distances.
How sensitive is the prediction to the choice of stability class?
Very sensitive. Neutral conditions (Class D) predict moderate dilution; stable conditions (Class F) predict high concentration; unstable conditions (Class A–B) predict low concentration. If the wrong stability class is used, concentration can be overestimated or underestimated by a factor of 5–10.
Sources
- Pasquill, F. (1974). Atmospheric Diffusion: The Dispersion of Windborne Material from Industrial and Other Sources (2nd ed.). Ellis Horwood Limited. ISBN: 978-0470657034
- Turner, D. B. (1994). Workbook of Atmospheric Dispersion Estimates (2nd ed.). US EPA Office of Air Quality Planning and Standards. link ↗
- Seinfeld, J. H., & Pandis, S. N. (2016). Atmospheric Chemistry and Physics: From Air Pollution to Climate Change (3rd ed.). John Wiley & Sons. ISBN: 978-1118947401
How to cite this page
ScholarGate. (2026, June 3). Atmospheric Dispersion and Transport of Air Pollutants. ScholarGate. https://scholargate.app/en/environmental-engineering/air-dispersion-modeling
Which method?
Set this method beside its closest kin and read them side by side — the library lays the books on the table; the choice is yours.
- Carbon Footprint AnalysisEnvironmental Engineering↔ compare
- Environmental Impact AssessmentEnvironmental Engineering↔ compare
- Green Infrastructure DesignEnvironmental Engineering↔ compare
- Noise MappingEnvironmental Engineering↔ compare