方法对比
并排查看您选择的方法；存在差异的行会高亮显示。
| 面向制造和装配的设计× | 增材制造切片× | |
|---|---|---|
| 领域 | 制造工程 | 制造工程 |
| 方法族 | Process / pipeline | Process / pipeline |
| 起源年份≠ | 1994 | 1990s |
| 提出者≠ | Boothroyd, G., Dewhurst, P. | Deckard, C. R. et al. |
| 类型≠ | Systematic approach to cost-effective product design | Computational method for additive manufacturing |
| 开创性文献≠ | Boothroyd, G., Dewhurst, P., & Knight, W. A. (1994). Product Design for Manufacturing and Assembly (1st ed.). Marcel Dekker. ISBN: 0-8247-9157-6 | Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T., & Hui, D. (2018). Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Composites Part B: Engineering, 143, 172-196. DOI ↗ |
| 别名 | DFMA, Design for manufacturability, DFA | 3D printing slicing, Layer generation, Mesh slicing |
| 相关 | 4 | 4 |
| 摘要≠ | Design for Manufacturing and Assembly (DFMA) is a systematic methodology for creating products that are inherently easier and less expensive to manufacture and assemble. Developed by Boothroyd, Dewhurst, and Knight, DFMA evaluates design choices based on their impact on production cost, quality, and speed, guiding designers toward solutions that balance performance, manufacturability, and economics. | Additive manufacturing slicing is the computational process of converting a three-dimensional CAD model into a series of two-dimensional cross-sectional layers that are sequentially built up by 3D printing hardware. Developed during the early maturation of stereolithography and selective laser sintering in the 1990s, this method bridges the gap between digital design and physical fabrication, enabling rapid prototyping and production of complex geometries. |
| ScholarGate数据集 ↗ |
|
|