Porovnať metódy
Prezrite si vybrané metódy vedľa seba; riadky, ktoré sa líšia, sú zvýraznené.
| Krájanie pre aditívnu výrobu× | Návrh pre výrobu a montáž× | |
|---|---|---|
| Odbor | Výrobné inžinierstvo | Výrobné inžinierstvo |
| Rodina | Process / pipeline | Process / pipeline |
| Rok vzniku≠ | 1990s | 1994 |
| Tvorca≠ | Deckard, C. R. et al. | Boothroyd, G., Dewhurst, P. |
| Typ≠ | Computational method for additive manufacturing | Systematic approach to cost-effective product design |
| Pôvodný zdroj≠ | Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T., & Hui, D. (2018). Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Composites Part B: Engineering, 143, 172-196. DOI ↗ | Boothroyd, G., Dewhurst, P., & Knight, W. A. (1994). Product Design for Manufacturing and Assembly (1st ed.). Marcel Dekker. ISBN: 0-8247-9157-6 |
| Ďalšie názvy | 3D printing slicing, Layer generation, Mesh slicing | DFMA, Design for manufacturability, DFA |
| Príbuzné | 4 | 4 |
| Zhrnutie≠ | Additive manufacturing slicing is the computational process of converting a three-dimensional CAD model into a series of two-dimensional cross-sectional layers that are sequentially built up by 3D printing hardware. Developed during the early maturation of stereolithography and selective laser sintering in the 1990s, this method bridges the gap between digital design and physical fabrication, enabling rapid prototyping and production of complex geometries. | Design for Manufacturing and Assembly (DFMA) is a systematic methodology for creating products that are inherently easier and less expensive to manufacture and assemble. Developed by Boothroyd, Dewhurst, and Knight, DFMA evaluates design choices based on their impact on production cost, quality, and speed, guiding designers toward solutions that balance performance, manufacturability, and economics. |
| ScholarGateDátová sada ↗ |
|
|