Compară metode
Examinează metodele selectate una lângă alta; rândurile care diferă sunt evidențiate.
| Design for Manufacturing and Assembly× | Stratificare în fabricarea aditivă× | |
|---|---|---|
| Domeniu | Fabricație | Fabricație |
| Familie | Process / pipeline | Process / pipeline |
| Anul apariției≠ | 1994 | 1990s |
| Autorul original≠ | Boothroyd, G., Dewhurst, P. | Deckard, C. R. et al. |
| Tip≠ | Systematic approach to cost-effective product design | Computational method for additive manufacturing |
| Sursa seminală≠ | Boothroyd, G., Dewhurst, P., & Knight, W. A. (1994). Product Design for Manufacturing and Assembly (1st ed.). Marcel Dekker. ISBN: 0-8247-9157-6 | Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T., & Hui, D. (2018). Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Composites Part B: Engineering, 143, 172-196. DOI ↗ |
| Denumiri alternative | DFMA, Design for manufacturability, DFA | 3D printing slicing, Layer generation, Mesh slicing |
| Înrudite | 4 | 4 |
| Rezumat≠ | Design for Manufacturing and Assembly (DFMA) is a systematic methodology for creating products that are inherently easier and less expensive to manufacture and assemble. Developed by Boothroyd, Dewhurst, and Knight, DFMA evaluates design choices based on their impact on production cost, quality, and speed, guiding designers toward solutions that balance performance, manufacturability, and economics. | Additive manufacturing slicing is the computational process of converting a three-dimensional CAD model into a series of two-dimensional cross-sectional layers that are sequentially built up by 3D printing hardware. Developed during the early maturation of stereolithography and selective laser sintering in the 1990s, this method bridges the gap between digital design and physical fabrication, enabling rapid prototyping and production of complex geometries. |
| ScholarGateSet de date ↗ |
|
|