Comparer des méthodes

	Analyse de fiabilité basée sur le risque	Maîtrise Statistique des Procédés
Domaine	Plans d'expériences	Plans d'expériences
Famille	Process / pipeline	Process / pipeline
Année d'origine	1960s–1990s (risk-informed frameworks codified ~1980s–1990s)	1924–1931
Auteur d'origine	Multiple contributors; formalized in reliability engineering literature from the 1960s onward (MIL-HDBK-217, IEC 60300 series)	Walter A. Shewhart
Type	Quantitative / semi-quantitative engineering analysis	Process monitoring and quality control method
Source fondatrice	Modarres, M., Kaminskiy, M., & Krivtsov, V. (2006). Reliability Engineering and Risk Analysis: A Practical Guide (2nd ed.). CRC Press. ISBN: 978-0849392016	Shewhart, W. A. (1931). Economic Control of Quality of Manufactured Product. Van Nostrand. ISBN: 978-0873890762
Alias	RBRA, risk-informed reliability analysis, risk-based dependability analysis, probabilistic risk and reliability assessment	SPC, statistical quality control, process control charting, Shewhart control
Apparentées	6	6
Résumé	Risk-based reliability analysis (RBRA) is an engineering methodology that combines classical reliability analysis — quantifying failure rates, component lifetimes, and system dependability — with risk assessment frameworks that weigh the severity and consequences of each failure mode. By ranking failures according to both their likelihood and their impact, RBRA guides engineers in allocating inspection, maintenance, and redesign resources where they matter most, rather than treating all potential failures as equally important.	Statistical Process Control (SPC) is a data-driven quality method that uses statistical techniques — primarily control charts — to monitor a manufacturing or service process over time. By distinguishing natural process variation (common cause) from unusual, actionable variation (special cause), SPC enables practitioners to maintain processes in a stable, predictable state and to detect problems early, before defective output reaches customers.