Сравнение методов
Просматривайте выбранные методы рядом; строки с различиями подсвечены.
| Анализ надежности на основе оценки рисков× | Анализ дерева отказов (Fault Tree Analysis, FTA)× | |
|---|---|---|
| Область≠ | Планирование эксперимента | Надёжность |
| Семейство | Process / pipeline | Process / pipeline |
| Год появления≠ | 1960s–1990s (risk-informed frameworks codified ~1980s–1990s) | 1981 |
| Автор метода≠ | Multiple contributors; formalized in reliability engineering literature from the 1960s onward (MIL-HDBK-217, IEC 60300 series) | Vesely et al. (US NRC Fault Tree Handbook) |
| Тип≠ | Quantitative / semi-quantitative engineering analysis | Deductive top-down failure analysis |
| Основополагающий источник≠ | Modarres, M., Kaminskiy, M., & Krivtsov, V. (2006). Reliability Engineering and Risk Analysis: A Practical Guide (2nd ed.). CRC Press. ISBN: 978-0849392016 | Vesely, W. E., Goldberg, F. F., Roberts, N. H., & Haasl, D. F. (1981). Fault Tree Handbook (NUREG-0492). U.S. Nuclear Regulatory Commission. link ↗ |
| Другие названия | RBRA, risk-informed reliability analysis, risk-based dependability analysis, probabilistic risk and reliability assessment | FTA, Fault Tree Method, Top-Down Reliability Analysis, Hata Ağacı Analizi |
| Связанные≠ | 6 | 3 |
| Сводка≠ | Risk-based reliability analysis (RBRA) is an engineering methodology that combines classical reliability analysis — quantifying failure rates, component lifetimes, and system dependability — with risk assessment frameworks that weigh the severity and consequences of each failure mode. By ranking failures according to both their likelihood and their impact, RBRA guides engineers in allocating inspection, maintenance, and redesign resources where they matter most, rather than treating all potential failures as equally important. | Fault Tree Analysis (FTA) is a top-down, deductive reliability method that begins with an undesired top-level failure event and systematically traces backward through chains of contributing causes using Boolean logic gates (AND, OR). First formalized by Watson at Bell Telephone Laboratories in 1961 and later standardized by Vesely, Goldberg, Roberts, and Haasl in the landmark 1981 NRC Fault Tree Handbook, FTA has become a cornerstone of quantitative risk assessment in nuclear, aerospace, and industrial safety engineering. |
| ScholarGateНабор данных ↗ |
|
|