مقایسهٔ روش‌ها

	تحلیل قابلیت اطمینان مبتنی بر ریسک	کنترل فرآیند آماری
حوزه	طراحی آزمایش	طراحی آزمایش
خانواده	Process / pipeline	Process / pipeline
سال پیدایش	1960s–1990s (risk-informed frameworks codified ~1980s–1990s)	1924–1931
پدیدآور	Multiple contributors; formalized in reliability engineering literature from the 1960s onward (MIL-HDBK-217, IEC 60300 series)	Walter A. Shewhart
نوع	Quantitative / semi-quantitative engineering analysis	Process monitoring and quality control method
منبع بنیادین	Modarres, M., Kaminskiy, M., & Krivtsov, V. (2006). Reliability Engineering and Risk Analysis: A Practical Guide (2nd ed.). CRC Press. ISBN: 978-0849392016	Shewhart, W. A. (1931). Economic Control of Quality of Manufactured Product. Van Nostrand. ISBN: 978-0873890762
نام‌های دیگر	RBRA, risk-informed reliability analysis, risk-based dependability analysis, probabilistic risk and reliability assessment	SPC, statistical quality control, process control charting, Shewhart control
مرتبط	6	6
خلاصه	Risk-based reliability analysis (RBRA) is an engineering methodology that combines classical reliability analysis — quantifying failure rates, component lifetimes, and system dependability — with risk assessment frameworks that weigh the severity and consequences of each failure mode. By ranking failures according to both their likelihood and their impact, RBRA guides engineers in allocating inspection, maintenance, and redesign resources where they matter most, rather than treating all potential failures as equally important.	Statistical Process Control (SPC) is a data-driven quality method that uses statistical techniques — primarily control charts — to monitor a manufacturing or service process over time. By distinguishing natural process variation (common cause) from unusual, actionable variation (special cause), SPC enables practitioners to maintain processes in a stable, predictable state and to detect problems early, before defective output reaches customers.